( BLUEBIRD ) ---- I built control line models before but this was one of the first R/C models that I designed and scratch built. It was a little heavy, but with a Fox 40 in the nose it flew quite well. The only problem with the design was the use of Clark Y, flat bottom airfoil. I changed this to a better airfoil which makes it a better sports plane. Model Spec's Wingspan ------------- 54" Length ----------------- 34" Power ------------------ 40 size

( BOSS-HOG ) ---- This is the plan of my oversized "piggy". Building it was simular to the original except that I used a lot of ply in the Fuselage. One other note, I made a alumium one piece landing gear and mounted it in the wing center-forward on a plywood plate. I attached this with 1/4 in. nylon bolts. The original Hog had wire gears mounted out in the wings. Model Spec's Wingspan ------------- 81" Length ----------------- 59" Power ------------------ Zenoah 23 gas Weight ----------------- 16 lbs.

( EMERAUDE ) ---- This is a design I came up with for the French homebuilt Emeraude. This was also an 80 inch bird that was a healthy 19 lbs. I modified a Kioritz "Weed Wacker" engine of 21 cc, and installed it in the nose. The plane was underpowered for it's size, but it flew very scale-like. You had to build up airspeed before you could loop or roll. Model Spec's Wingspan ------------- 80" Length ----------------- 58" Power ------------------ Kioritz 21 gas Weight ----------------- 19 lbs.

( EZ-ED ) ---- I needed a plane that I could take with me when I go traveling, it had to be small enough to store in a small space. I also wanted to be able to hand launch it (no wheels). All this and I wanted it to be aerobatic, With a OS 15 FP ? -- you bet! Don't let anyone tell you that you should have at least a 40 size plane to have fun. These little fellows are a blast! Model Spec's Wingspan ------------- 48" Length ----------------- 34" Power ------------------ OS 15 FP Weight ----------------- 44 oz. Pictures from another Builder

( SKY-MASTER ) ---- I have always liked the Sky Master so I drew this up, and put it together. It flew fair but I never had the chance to get it's full potential, it's life ended when I went flying with my antenna down, hey I'm not perfect! Another dumb thing was not taking a photo. Model Spec's Wingspan ------------- 62" Length ----------------- 48" Power ------------------ OS 25, OS 20 Weight ----------------- 6 lbs.

( GRUNT ) ---- I need a Test Bed for a bunch of converted gas engines that I have yet to try out, Another Kioritz, a Homelite 35, and a Ryobi 32. I wanted a plane that is simple, no cowl, strong, with the ease of conversion. I think that this design will work, we will see!

Model Spec's
Wingspan ------------- 80"
Length ----------------- 54"
Power ------------------ ???
Weight ----------------- light

( WTF-225 ) ---- This is the first of the WTF Twins, ( see the story in the TWIN PAGE ). I have really been happy with this design and I hope to scale it up to 60 size engines in the future. Model Spec's Wingspan ------------- 60" Length ----------------- 47" Power ------------------ 2 - OS 25's Weight ----------------- 6 lbs.

( WTF-240 ) ---- This is the second of the WTF Twins,( see the story in the TWIN PAGE ). This size is more stable, and has more authority, could be the increase in dihedral. The 60 size is next! Model Spec's Wingspan ------------- 72" Length ----------------- 51" Power ------------------ 2 - OS 40's Weight ----------------- 8 lbs.

( WILDONE ) ---- Another Twin yet to be built! I like this one because it would be easy to adapt retracts. Down load the DXF file and have a look. Model Spec's Wingspan ------------- 72" Length ----------------- 47" Power ------------------ 2 - OS 40's Weight ----------------- 8 lbs.

( BIGONE ) ---- I kind of like this big bird, haven't build it yet but I like it. I don't think it would be much in the aerobatic department, but it would look good just flying around. Model Spec's Wingspan ------------- 80" Length ----------------- 51" Power ------------------ GAS Weight ----------------- 15 lbs.

( ELECT-J ) ---- I tried a Factory Kit for an Electric Trainer but it seemed heavy and over built. I thought I would try my own design. This is what I came up with. It has light weight construction and a lot of wing area with ailerons (no rudder) Weighs in at 42 oz. compaired to 50 oz for the kit. The rascal flys great, good climb, throttle back and enjoy long flights, It's a winner Folks! Let me know if you put one together. Model Spec's Wingspan ------------- 48" Length ----------------- 36" Power ------------------ 05 can type Weight w/Battery-------- 42 oz.

( LIGHT DUTY ) ---- Here is a variation of the ELECT "J", A low wing model built even lighter. Added a Master Airscrew Reduction gear for the first trials. I intend to go with a direct drive motor in other test. Model Spec's Wingspan ------------- 48" Length ----------------- 36" Power ------------------ 05 can type Weight w/Battery-------- 38 oz.

( CAP 10B) A nicely detailed plan designed by Carl Layden email --- laydenc@nbnet.nb.ca. Model Spec's Wingspan ------------- ". Power ------------------

( CAP-10BMM) Improved version of the Carl Layden design With the prototype picture. Highly detailed DXF file sent in by Carl Layden email --- laydenc@nbnet.nb.ca Model Spec's Wingspan ------------- 58". Power ------------------ .46

( AMP ) This a Al Eastman electric design supplied by www.rcland.net. The picture was sent in by Ronald Whisenhunt, Scratch built from these plans, nice job Ron! Model Spec's Wingspan ------------- 48 inch. Power ------------------ Elect.

( Modified SEAMASTER 40 ) Light Weight Modified Seamaster design by Glenn Morris, with building notes -- email -- flyboy2@email.msn.com ------------------ Model Spec's Wingspan ------------- ". Power ------------------ .

Building notes

( SCHOOL YARD BIPE ) 1/2 A Biplane, a great school yard flier designed by Glenn Morris -- email -- flyboy2@email.msn.com ----- Model Spec's Wingspan ------------- ". Power ------------------ .

( The SAUCER ) Richard C. Bradford supplied this Great control line drawing. For More information contact Richard at --- rcbav@mindspring.com

( RD346B ) This Is a Nice Bipe Designed by Ron Graham. It's not complete yet, but I was just curious to see if there was any interest in this size and type of project. The plane has a 75" w.s., an overall length of 77" set up for a 5.0 cu.in. twin. e-mail ---- airrds1@cwix.com Model Spec's Wingspan ------------- 75" Power ------------------ up to 5.0 Cu.In.

( MOONRACE )Here are a model airplane Sent in by Gיrard Palardy That he digitalised from a old magazine.(Flying Models nov. 1985) It is a very fast machine powered by a OS .61 with pump and tuned pipe. Model Spec's Wingspan ------------- " Power ------------------ .61

( BGILES ) Aeronautical engineering student Erez Ravivh designed this rendition of the Giles g-202. It is a very clean and fast, but with the stability to fly slow. You can contact Erez e-mail ---- erezraviv@hotmail.com Model Spec's Wingspan ------------- 50". Power ------------------ .40 to .46

( EASTWIND II ) This Twin electric designed by Al Eastman and sent in by Eddy Matthews. Should be interesting to the electric builder. Model Spec's Wingspan ------------- . Power ------------------

( GULL) is a nice detailed Chuck Griffith design sent in by Chuck e-mail -- evey@xprs.net Check it out! ................... Model Spec's Wingspan ------------- 77". Power ------------------ .40

( JUNK YARD DOG ) is a good one for all you Fun Fly Guys, designed by Andy Mcnew -- Model Spec's Wingspan ------------- ". Power ------------------ .40

( PIT BULL ) The Pit Bull is another Andy Mcnew Fun Fly design ------------------------ Model Spec's Wingspan ------------- ". Power ------------------ .

( JAKE ) is the third in the series of fun fly designs by Andy Mcnew ----------------------------- Model Spec's Wingspan ------------- ". Power ------------------ .40

( TWIN ) Just plain Twin! designed by Dan e-mail --- DSimp60380@aol.com ------ Model Spec's Wingspan ------------- 55". Power ------------------ 2-.20-.25

( TIME MACHINE ) Nice Sport plane! designed by Dan e-mail --- DSimp60380@aol.com Model Spec's Wingspan ------------- 66". Power ------------------ .61 - .91

( BIPLANE ) nice little Bipe is a Matthew Francis design. Matt says it is loosely based on a Stearman, but is not meant to be a scale model of anything. Model Spec's Wingspan ------------- ". Power ------------------ .15 - .25

( BUZZ BOMB ) a little sport flier which is surprizingly fast and agile even on a .049! designed by Matthew Francis for the 1/2A crowd Model Spec's Wingspan ------------- ". Power ------------------ .049

( BIG FLYING WING ) designed by William Schwartz it has a converted Horton Flying Wing airfoil. You can check out Bills Web SiteHERE Model Spec's Wingspan ------------- 86". Power ------------------ 90 to 120

( AEROSPORT ) designed by Jason Sanders an easy to build 1/2 A. He says it flys great! Model Spec's Wingspan ------------- ". Power ------------------ 1/2 A

( SUPER SINBAD ) Is a highly detailed William Kaminsky drawing of a Berkeley kit glider. E-mail coosbaylumberco@yahoo.com Model Spec's Wingspan ------------- 62". Power ------------------ Glider

( BINARY ) Binary is a design sent in by Howard Wiersma, she is a 1/2A twin designed around the Norvel .074 engines. Model Spec's Wingspan ------------- ". Power ------------------ 1/2 A

Britten-Norman Islander ) ---- I like the High wing twins. A fellow ask me to start a plan for him of a Britten-Norman Islander from three views. I gave him this. You can make all the adjustments you want. Model Spec's Wingspan ------------- 96" Length ----------------- 68" Power ------------------ OS 60's Weight ----------------- 10 lbs. Download DXF File

( SUKHOI 26 ) designed by Eric Middeldorp, These are highly detailed plans for the advanced builder. Picture is the designers plane. Plans come DXF format in a 4 sheet zip file (1 meg)email --- edorp@hotmail.com --- For building notes and downloading plans in (metric) click - HERE . Model Spec's Wingspan ------------- 58.6". Power ------------------ .60 to .90 Download "scaled U.S." DXF Files

( SCALE CUB GEAR ) Marc ( hydra@infoave.net ) supplied this scale landing gear for a J-3 Cub. He adds, Make a holding jig, odd pieces of 1x2 wood worked for me. To get the main axle perfectly aligned, you will need to span the entire width of the tread, then after all is soldered, cut out the "bridge" and Whallajh! The axles are aligned! trim and drill as needed. I used steel brakeline, 1/4" and 3/16", worked to slide into each other! Download 4 sheet plan. Download 4 Sheet Plan

( SCALE 20 Size FLOATS ) Light Weight Floats for 20 size aircraft, Excellent design by Glenn Morris -- email -- flyboy2@email.msn.com ------------------ Model Spec's Wingspan ------------- ". Power ------------------ .20 size planes Download DXF File

( SCALE 40 Size FLOATS ) Light Weight Floats for 40 size aircraft, larger float design by Glenn Morris -- email -- flyboy2@email.msn.com ------------------ Model Spec's Wingspan ------------- ". Power ------------------ .40 size planes Download DXF File

( J-3 CUB ) Light Weight CUB design by Glenn Morris, Three sheet plans with float plan -- email -- flyboy2@email.msn.com ------------------ Model Spec's Wingspan ------------- ". Power ------------------ . Download DXF Files

( HAWKER HURRICANE) Richard C. Bradford supplied this Great R/C Drawing, and he told me that it be presented as a project that others can lend a hand and finish. For More information contact Richard at --- rcb55@ix.netcom.com Model Spec's Wingspan ------------- 72" Power ------------------ Ryobi 31cc GAS Download DXF File

( CURTIS SWIFT XP-31 ) A William Schwartz Design XP-31, for a .60 size . ------------------------------- Model Spec's Wingspan ------------- 70" Power ------------------ .61 Download DXF File

( CURTIS ACCENDER XP-55 ) Another great William Schwartz Design The XP-55, for a .60 size . ------------------------------- Model Spec's Wingspan ------------- 63" Power ------------------ .61 Download DXF File

( CORSAIR ) William Schwartz supplied this drawing, for a .60 size Corsair. -------------------------------- Model Spec's Wingspan ------------- 55" Power ------------------ .61 Download DXF File

( CESSNA AGWAGON ) A William Schwartz design that would make a nice Cessna Agwagon ----- e-mail ----- bills@lisco.net Model Spec's Wingspan ------------- " Power ------------------..40 to .45 Download DXF File

( A-36 MUSTANG ) A William Schwartz design of a North American A-36 ----- e-mail ----- bills@lisco.net Model Spec's Wingspan ------------- 60" Power ------------------.61 Download DXF File

( DC-3 DAKOTA ) This design was sent in by Roger Jones . Nicely drawn up version of an electric DC-3. Model Spec's Wingspan ------------- . Power ------------------ Download Files

( DC-3 Scale Gear ) This design was sent in by Roger Jones -- email ---- slopesoarer@netscapeonline.co.uk ----- I am sure those scale modelers out there will set up and take notice! Model Spec's Wingspan ------------- . Power ------------------ Download Files

( P-51D from italy ) This design was sent in by P. Pastorino, of the famous Mustang.---------------------------- Model Spec's Wingspan ------------- . Power ------------------ .40 Download DXF Files

( Sea Fury ) Dan sent this detailed Sea Fury design e-mail him at DSimp60380@aol.com ----------------- Model Spec's Wingspan ------------- 50". Power ------------------ .40-.45 up Download DXF Files

( SPITeful ) Dan sent another nice design e-mail him at DSimp60380@aol.com. -------------------------------------------- Model Spec's Wingspan ------------- 51". Power ------------------ .40-.45 up Download DXF Files

( F-117 STEALTH FIGHTER ) Jason Niemier sent in this bitmap trace drawing, He did a great job on this time taking project Model Spec's Wingspan ------------- ". Power ------------------ Download Photo Files

( REP )--- REP Type B 1910 Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( VINTAGE )--- Vintage Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( BRISTOL PRIER )--- Bristol Prier Monoplane Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( HIENKEL 18 )--- A Lighter 40 size Design by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ .40 size

Download DXF File

( ROLLAND )--- Rolland DVI G Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( POLIKARPOV Po2 )A William Schwartz rendering of a Russian Polikarpov Po2. It was a plane of all trades. Trainer,tow plane,night bomber,sport,etc. ----- e-mail ----- bills@lisco.net

Model Spec's
Wingspan ------------- 58"
Power ------------------..40 to .45





Download DXF File

( FOKKER D VII ) William Schwartz supplied this drawing, for a .40 size plane. --------------

Model Spec's
Wingspan ------------- 55"
Power ------------------ .40 to .50





Download DXF File

( FAIRCHILD 22 ) William Schwartz supplied this nice drawing of a Fairchild 22. ----- e-mail ----- bills@lisco.net

Model Spec's
Wingspan ------------- "
Power ------------------
Download DXF File

( HENSCHEL ) Here is another William Schwartz design of a Henschel -- keep it up Bill !. ----- e-mail ----- bills@lisco.net

Model Spec's
Wingspan ------------- "
Power ------------------
Download DXF File

( LUBLIN R-XIV ) A William Schwartz design of a LUBLIN R-XIV ----- e-mail ----- bills@lisco.net

Model Spec's
Wingspan ------------- 64"
Power ------------------.35 - .40




Download DXF File

( WRIGHT N-1 ) William Schwartz supplied this Great R/C Drawing, It is a close to scale Wright N-1 a prototype for the U.S. Navy. He increased the vertical tail area slightly for eye appeal as well as functional ability. The plans are not complete but anyone that scratch builds should be able to build from them. He also added 1 inch dihedral as the original had none.

Model Spec's
Wingspan ------------- 55"
Power ------------------ .40 to .50
Download DXF File

( ALBATROSS A ) William Schwartz supplied another nice drawing, for a .40 size plane. It's a shame that there isn't more WWI aircraft models in this size range. I'll put in a plug for his R/C club. Ottumwa R/C Fliers

Model Spec's
Wingspan ------------- 55"
Power ------------------ .40 to .50
Download DXF File

( DEHAVILLAND 77 ) This antique DeHavilland designed by William Schwartz. A 40 size low wing!

Model Spec's
Wingspan ------------- .
Power ------------------ .40

Download DXF File

( ALBATROSS )--- Another nice design by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( ALBATROSS B1 )--- Design by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( BLEROIT )--- Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( BLEROIT II )--- Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( DEPERDUSSIN TT )--- Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( EASTBOURNE )--- Eastbourne Monoplane 1911-1913 Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( EINDECKER )--- Fokker Eindecker III Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( FLANDERS )--- Flanders Monoplane Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( MORANE )--- Morane-Sauinier AG Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( DEPERDUSSIN )--- Deperdussin 1911 designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( DeMarcay 2 )--- DeMarcay 2 CI Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( GOURDOU )--- Gourdou-Leseurre CI Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( LIORE )--- Liore et Olivier LEO4 Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( LOHNER )--- Lohner IC.15 Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( McDOWELL )--- McDowell Monoplane Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( MORAINE )--- Moraine-Saulnier P (parasol) Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( REP )--- R.E.P. N series Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( SIRIUS )--- SIRIUS 40 Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- "
Power ------------------ size

Download DXF File

( WESTLAND )--- Westland Interceptor Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- 65"
Power ------------------ size

Download DXF File

( CURTIS SWIFT XP-31 )--- XP-31, for a .60 size Designed by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- 70"
Power ------------------ .61 size

Download DXF File

( FIESLER 167 )--- another winner by William Schwartz -- you can check out Bills Web SiteHERE

Model Spec's
Wingspan ------------- 49.5"
Power ------------------ .40-.46 size

Download DXF File

טיסנים חשמלים

( ELECT-J ) ---- I tried a Factory Kit for an Electric Trainer but it seemed heavy and over built. I thought I would try my own design. This is what I came up with. It has light weight construction and a lot of wing area with ailerons (no rudder) Weighs in at 42 oz. compaired to 50 oz for the kit. The rascal flys great, good climb, throttle back and enjoy long flights, It's a winner Folks! Let me know if you put one together. Model Spec's Wingspan ------------- 48" Length ----------------- 36" Power ------------------ 05 can type Weight w/Battery-------- 42 oz.

( LIGHT DUTY ) ---- Here is a variation of the ELECT "J", A low wing model built even lighter. I Added a Master Airscrew Reduction gear for the first trials. The plane is quick due to it's 40 inch WS, It will also do loops, rolls, inverted, etc. and climbs like crazy! After 15 flights, I like the reduction gear, and I am not touching it! Let me know if you build one. Model Spec's Wingspan ------------- 40" Length ----------------- 36" Power ------------------ 05 can type Weight w/Battery-------- 38 oz.

( EZ-ED Speed 400 ) This is a electric version of the original EZ-ED .15. As soon as I build it, I'll get some pictures posted! Model Spec's Wingspan ------------- 36". Power ------------------ Speed 400

( ELECT-J 400 ) This is a speed 400 version of the original Elect "j". Bare bones 4 1/2 oz! (see pictures). I tested it today and she flew great, Just like her big brother! let me know if you build one. Model Spec's Wingspan ------------- 36" Length ----------------- 24" Power ------------------ LeMans 29 BB Weight w/Battery-------- 22oz.

( LIGHT DUTY 400 ) ---- Here is a variation of the Light Duty, Using a speed 400 motor and speed controller. Should work well. Model Spec's Wingspan ------------- 36" Length ----------------- 26" Power ------------------ speed 400 Weight w/Battery-------- 25 oz.

( 65% KAOS ) ---- Great speed 400 KAOS design by Joe Jopling, it is covered with Sig lightweight opaque film for additional weight savings. Model Spec's Wingspan ------------- 38" Length ----------------- 34" Power ------------------ speed 400 Weight w/8 cells-------- 23.7 oz.

( TERMINATOR 400 ) ---- Fred Van Der Hoek designed and built the T-400 in late '99. and the plane is flying a year later. The prototype is powered by a direct drive Speed 400, Hitech 555 rx. it is covered with light silkspan, with 3 coats of thinned out clear dope to get the weight down to 14 oz.with (7) .500 cells velcroed to the bottom for easy access. The performance is medium hot! Model Spec's Wingspan ------------- 26 3/4" Length ----------------- 15" Power ------------------ speed 400 Weight w/Battery-------- 14 oz.

( AERONCA L-3 ) Speed 400. This is a Roger Winger design of a Aronca sent in by www.rcland.net. visit his site for a wealth of RC information. Model Spec's Wingspan ------------- 40 inch. Power ------------------

( SKYVAN ) This design of the Skyvan was sent in by Roger Jones . Built by Short Brothers in Northern Ireland in the 60's This is an electric version. Model Spec's Wingspan ------------- . Power ------------------

( LOCKEED C-130 ) This C-130 Electric is a Johann Delago design, sent in by Eddy Matthews. If your are looking for something different here it is! Model Spec's Wingspan ------------- . Power ------------------

( DC-3 DAKOTA ) This design was sent in by Roger Jones . Nicely drawn up version of an electric DC-3. Model Spec's Wingspan ------------- . Power ------------------

( AMP ) This a Al Eastman electric design supplied by www.rcland.net. The picture was sent in by Ronald Whisenhunt, Scratch built from these plans, nice job Ron! Model Spec's Wingspan ------------- 48 inch. Power ------------------ Elect.

( GOLDIE 2 ) is a Bill Bowne design, has aileron/elevator/rudder for aerobatics ------------------- Model Spec's Wingspan ------------- . Power ------------------

( FOKKER D-VII ) is a highly detailed Bill Bowne design, it has a geared Speed 400 For power ---------------------------------------------- Model Spec's Wingspan ------------- . Power ------------------ Speed 400

( EASTWIND II ) This Twin electric designed by Al Eastman and sent in by Eddy Matthews. Should be interesting to the electric builder. Model Spec's Wingspan ------------- . Power ------------------

( MABUCHI RS 540 ) This motor design was sent in by Glenndelco@aol.com Should be of interest to the electric builder. Model Spec's Wingspan ------------- . Power ------------------